Flipper Zero Dual Touch Mini V3 3-in-1 ESP32 Wi-Fi Board Built-in GPS Module & Screen by AWOK

This is A plug-and-play dual-ESP32 board with built-in GPS and screen—ideal for advanced Wi-Fi monitoring and custom Flipper Zero projects.

Its Main Features：
- This board has 2 ESP32-WROOM chips on it.
- GPS can be toggled on and off for both ESP32 chips via the dip switches located on the back of the board.
- The GPS can be ran simultaneously to both chips (by default all switches will be flipped to the on position)
- This board is intended to monitor your network and should not be used to transmit.
- This Development board does not include firmware, the intention of this device is to provide you with hardware to program and develop your own firmware. There are many different firmware's that an ESP32 can run and are available online so please research which one suits your needs the best.
- One ESP32 controls the screen, the other can be used via CLI or via the GPIO pins.

WHATS INCLUDED

1x Dual Mini V3 PCB
1 × Transparent polycarbonate housing (SMA mounting hole included)
2x External 2.4Ghz Antenna
1x INTERNAL Ceramic GPS Antenna
1x External GPS Antenna

WHATS NOT INCLUDED
- Firmware

Getting Started

Load your firmware of choice—each ESP32 is separately programmable.

Toggle the GPS on/off module by module via the DIP switches on the back.

Connect the included antennas and power the board via USB-C (or your preferred power rail).

Use the display to monitor status or output while using the second ESP32 for your custom code.

Our company has specialized in such products for many years. If you need other goods for geeks, contact us directly via your personal account — we are available 24/7!